ProMax PXS1F04S0000 Chemical Dosing System - Single product, Bottle fill, 4LPM

PROMAX is used to dilute detergents using a "Venturi" system.
The advantage of this system is the water / chemical mix that creates a ready-to-use product.
Promax is an automatic dilution system that does not require any power supply , as suction is created by the strength of the water supply. Promax mainly applies to the dilution of concentrated products suitable for cleaning and disinfecting floors and surfaces. The most common applications and recommended Promax models are:
- Bottle filling: Promax 4l / min
- Filling buckets and sinks: Promax 14l / min
- Filling Tanks and Soil Washing Systems: Promax 14-30l / min
The products used in these applications can be:
Odor elimination systems, glass and multi-surface detergents, degreasers, concentrated detergents, deep-cleansing foaming agents, sanitizing agents, ammonia, deodorizing detergents, floor and multi-surface detergents, multi-surface degreasers ... etc.

Technical characteristics:
Water supply connection Possible from right or left
Connection type ¾ "Female GHT
Disconnect Type Interval F (Flexible Membrane) Interval A (Physics, Visible Range)
Venturi Flow Rate 1GPM (4lt / m) (gray), 4GPM (16lt / m) (yellow), 8GPM (30lt / m) (blue)
Actuation Systems Buttons
Number of entries product 1 product
Operating pressure Min 15 PSI (1 bar) Max 130 PSI (9 bar), Ideal: 30 - 60 PSI (2 - 4 bar)
Max Temperature 160 ° F (70 ° C)
Notes Possibility to add modules after installation

Packing content:
- Distributor
- Suction tube - 13ft (4m)
- 6.5ft (2m) drain hose for 14-30lt / min (4 - 8 GPM) or "S" shaped drain hose for 4lt / min (1 GPM) spray bottle filler
- Hose suspension (only for 6.5ft hose)
- Complete installation kit:
o Plastic clamps (2 pieces)
o Calibration nozzles (1 sachet)
o Suction strainer and non-return valve (1 piece)
o Ceramic weight (1 piece)
o Fixings (3 pieces)
o Screws (3 pieces)
o Washers (3 pieces)
o Connection (for connection of two or more units)
o GHT connector ¾ "male - GHT male connector ¾"
o Adhesive Labels for Container Identification (1 lot)
o Adhesive labels for product identification (1 lot)